Addressing Your Tuckpointing Questions

Masonry can suffer a variety of damages and problems. For homes that incorporate masonry, there will likely come a time when you will need to have repairs made to it. Depending on the type and severity of the damage to the masonry, tuckpointing may be one of the more effective solutions for repairing these issues.

What Happens During Tuckpointing Work?

Tuckpoint is ideally used in situations where the masonry that binds the bricks together starts to fail. When this masonry starts to fail, it will cause the bricks to loosen and fall out, which will make it important to see to these repairs in a timely fashion. During the course of these repairs, the contractor will gently remove the damaged mortar from between the bricks. Once the failing mortar has been removed, the new mortar will be injected between the bricks. By opting for this type of repair work, you can avoid the need to completely replace large sections of masonry. However, it is important for the bricks to still be in good condition. Otherwise, they may be at risk of crumbling and falling once the mortar is removed.

Is There A Time Of The Year When Tuckpointing Should Be Done?

Homeowners will often be concerned about when they should schedule to have tuckpointing done to their damaged masonry. Luckily, it is possible for this work to be done throughout the year as it will not be overly impacted by temperature extremes. However, it is important to avoid allowing the freshly installed mortar to be exposed to moisture. For this reason, it will be necessary to schedule this work around the rain forecast. In most instances, the tuckpointing can be completed within a day or two, and most contractors will use rapid drying mortar. This will allow these repairs to be completed as quickly and efficiently as possible.

Will You Need To Be Home For The Tuckpointing Repairs?

With many home repairs, it will be necessary for you to be present to oversee this work and to allow the contractors access to the damaged areas of the home. However, this is typically not the case with tuckpointing as the contractors will be working on the exterior of the home. As long as you are able to leave these contractors a key or code to your gate, they will be able to perform this work without you being present. If you choose to not be present for this work, you should closely inspect it once they finish to ensure they have repaired all of the years that were suffering from failing mortar.

To learn more, contact a company like Excel Chimney & Fireplace Service

Share